Characteristics
Basic characteristics
Tablex is a high density fibreboard made from eucalyptus with a smooth side and a rough side.
- High resistance
- High density
- High flexibility
- Excellent behavior against humidity
- Maximum durability
- Suitable for indoors uses
- CE Marking (EN 13986)
Products
Tablex complies with EN 622-1 and EN 622-2 requirements for hardboards, type HB.
- Standard ST-A2: Wooden fibreboard high density (HB) for non-structural purpose use in dry conditions. Download file.
- H1 Hydro-tempered: Wooden fibreboard high density (HB) for non-structural purpose use in dry conditions. Download file.
- Superlac SL-A1: Wooden fibreboard (HB), for non-structural purpose use in dry conditions, with surface quality suitable for demanding lacquering. Download file.
- Flexible I0: Wooden fibreboard (HB), for non-structural purpose use in dry conditions, easy curve. Download file.
- Mobelpan: Wooden fibreboard (HB), for non-structural purpose use in dry conditions, with water based paint applied by roller and a UV-topcoat to protect the surface from the effects of water and other chemical agents and from scratches. All colours are available in glossy, mate and super mate finishes. Download file.
- Perforated PF: Wooden fibreboard (HB), for non-structural purpose use in dry conditions, perforated (pegboard). Can be done with Tablex or Mobelpan (painted) boards. Download file.
- Mobelpan H1 Green: Wooden fiberboard (HB) for non-structural purpose use, hydrophobic, coated with moisture-resistant and repaintable paint. Download file.
- Flooring Underlay: Wooden fibreboard (HB), sanded, for non-structural purpose use in dry conditions, specially used for flooring, calibrated boards. Download file.
- Packaging I1-PK: Wooden fibreboard (HB) for non-structural purpose use in dry conditions, specially used for packaging. Download file.
Thickness
| Thickness (mm) | |||||
|---|---|---|---|---|---|
| 2.0 | 2.5 | 3.0 | 4.8 | 5.4 | 6.0 |
Grading: for specific applications, our Tablex can be sanded until a tolerance thickness of 0,15mm.
Size
| Size (mm.) | |||||
|---|---|---|---|---|---|
| 1220x610 | 1200x100 | 2440x1220 | 2750x1220 | 3050x1220 | 3660x1220 |
Custom-made: cutting machines available to fit special size pieces and rounded corners.
For other thicknesses and measurements, please contact with our team.
H1 Hydro Tempered, high humidity-resistant hardboard
In Betanzos HB we are looking always to improve and innovate our products. By doing this, we are expanding the ways how it can be used and we are also offering a a higher number of applications that, also, answers to the demands of the most sustainable products. Thanks to this innovation, we have surpassed the Tablex and we are announcing the launch of the H1 Hydro Tempered, a high-density waterproof wooden fiberboard.
This worksheet has more information about the technical features of the H1 Hydro Tempered: Download file
We just created a high-density, resistant and flexible waterproof hardboard, that is natural and friendly to the environment during its fabrication. Tablex waterproof is made with natural wood fibers coming from certified plantations (FSC and/or PEFC).
Tablex already comes with excellent qualities in its behavior againts humidity, and now, we are taking it even further, we just added a special tratment that provides an even better resistance against humidity. Thanks to this, we just improved our product’s resistance in humid conditions, prolonging the life cycle of the hardboard.
These new priorities make the H1 Hydro Tempered, way more appropiate for special applications, such as foundations for roofs, interior coating for walls, floors and ceilings, protective structures, doors, signboards and special crates, where the humidity factor is a decisive factor for its durability.
For added technical information or special appliations, please contact with our team.
Topcoat Mobelpan
Our Tablex can be supplied naturally (one smooth side and one rough side) or with any of the different topcoats (Mobelpan is the trade mark for Tablex painted) depending on the needs of each client and their applications.
- Painted. Painted Tablex is marketed under the trademark Mobelpan and allows an infinity of colours completely personalized with plain colours, textiles and woods, with bright, matte or super matte topcoats.
- Writting boards. Finished as chalkboard, to write with chalk, and whiteboard for dry-erase felt-tp pen.
- Varnish-friendly. Specific to applications where Tablex is going to be varnished once used, as a high bright topcoat, with a robot. Available with topcoats suitable for any kind of varnish, including water based ones.
- Pre-painted. Specific to applicant where Tablex is going to be painted once used, like cupboard doors, partition walls or fruit boxes.
- Perforated. Different patterns of perforated Tablex are available with 5 or 7 mm holes and 25,4 mm pitch, or others on request.
- Sanded. Tablex can be acquired sanded and painted on one or both sides.
- Combinations. Ask our team about your specific needs and the different personalized topcoats and combinations that Betanzos HB can offer.
Physical and mechanical properties
| Properties | Reference test | Units | Thickness(mm) | ||
|---|---|---|---|---|---|
| ≤ 3.5 | <3.5 a 5.5 | > 5.5 | |||
| Flexural Strength | EN 310 | N/mm² | ≥30 | ≥30 | ≥30 |
| Tensile Strenght | EN 319 | N/mm² | ≥0.50 | ≥0.50 | ≥0.50 |
| Swelling in Thickness 24h | EN 317 | N/mm² | ≤37 | ≤30 | ≤25 |
Note: Values based on Standard UNE-EN 622-2: Fibreboards – Specifications -Part 2: Requirements for hardboards. Type HB.
General Specifications (Tablex Standard ST-A2)
| Properties | Reference test | Units | Thickness (mm) | ||
|---|---|---|---|---|---|
| ≤ 3.5 | <3.5 a 5.5 | > 5.5 | |||
| Tolerance on nominal dimensions: thickness | EN 324-1 | mm | ±0.3 | ±0.5 | ±0.7 |
| Length and Width | EN 324-1 | mm | ±2 (max. de 5mm) |
±2 (max. de 5mm) |
±2 (max. de 5mm) |
| Squareness | EN 324-2 | mm | ≤2 | ≤2 | ≤2 |
| Moisture Content | EN 322 | % | 4 a 9 | 4 a 9 | 4 a 9 |
Applications for Construction - Technical information for arquitects
The advantages of Tablex in the construction sector makes it ideal for sustainable buildings.
Technical characteristics according to EN 789 (thickness 5.0 mm)
| Characteristic strength | ||||
|---|---|---|---|---|
| Tension | Principal direction | ft,l,k | 24.12 | N/mm² |
| Transversal direction | ft,p,k | 18.18 | N/mm² | |
| Compression (in plane) | Principal direction | fc,l,k | 24.21 | N/mm² |
| Transversal direction | fc,p,k | 15.15 | N/mm² | |
| * Edgewise bending | Principal direction | fm,k | 33.93 | N/mm² |
| Panel shear | fvk | 11.11 | N/mm² | |
| Planar shear (rolling) | fr,k | 2.06 | N/mm² | |
| Compression perpendicular to the plane | fc,90,k | - | N/mm² |
* Adaptation test UNE EN 408 (5 boards glued)
| Stiffness | ||||
|---|---|---|---|---|
| Tensión | Principal direction | Et,l | 5107 | N/mm² |
| Transversal direction | Et,p | 4649 | N/mm² | |
| Compression | Principal direction | Ec,l | 5289 | N/mm² |
| Transversal direction | Ec,p | 3812 | N/mm² | |
| * Edgewise bending | Principal direction | Em | 5736 | N/mm² |
| Panel shear | Gv | 1858 | N/mm² | |
| Planar shear (rolling) | Gr | 417 | N/mm² | |
| Compression perpendicular to the plane ** | Ec,90 ** |
529 | N/mm² |
* Adaptation test UNE EN 408 (5 boards glued)
Ceiling
If you wish to consult detailed technical information and to prescribe this application, download the following file: